Aggiusta la tua roba Comunità Store

Sony BDP-BX520 Port Board Replacement

Introduzione

This guide requires only simple tools, like a screwdriver and metal spudger. Be careful when handling circuit boards to ensure the device does not become further damaged.

Cosa ti serve

  1. Sony BDP-BX520 Port Board Replacement, Disc Tray Cover: passo 1, immagine 1 di 1

    • Plug in the Blu-Ray player, then press the power button, making sure the Blu-Ray player is powered on.

    • Press the eject button on either the top of the Blu-Ray player or on the remote to open the disc tray.

    Modifica

  2. Sony BDP-BX520 Port Board Replacement: passo 2, immagine 1 di 1

    • Grab the sides of the disc tray cover and carefully pull each side upwards, starting with the left side. This will unhook the cover from the tray.

    Modifica

  3. Sony BDP-BX520 Port Board Replacement: passo 3, immagine 1 di 1

    • Close the disc tray, then power off and unplug the Blu-Ray player.

    Modifica

  4. Sony BDP-BX520 Port Board Replacement, Front Panel: passo 4, immagine 1 di 1

    • Insert the nylon or metal spudger under the clip on the side near the front of the device. Lift the clip so it is free from the device.

    • Lifting these clips may require you to hold one clip open while you move on to the next clip.

    Modifica

  6. Sony BDP-BX520 Port Board Replacement: passo 5, immagine 1 di 1

    • Flip device over so the bottom faces you.

    • Insert the nylon or metal spudger and lift the two clips on the bottom of the device.

    Modifica

  7. Sony BDP-BX520 Port Board Replacement: passo 6, immagine 1 di 1

    • Lift the clip on the opposite side of the device with the nylon or metal spudger.

    Modifica

  8. Sony BDP-BX520 Port Board Replacement: passo 7, immagine 1 di 2 Sony BDP-BX520 Port Board Replacement: passo 7, immagine 2 di 2

    • Grasp the front case firmly and lift from the rest of the device.

    • Lifting may require some force.

    Modifica

  9. Sony BDP-BX520 Port Board Replacement, Port Board: passo 8, immagine 1 di 2 Sony BDP-BX520 Port Board Replacement, Port Board: passo 8, immagine 2 di 2

    • When handling circuit boards like the motherboard and port board, make sure to only touch them on the sides.

    • Locate the large ribbon cable connecting the port board to the motherboard.

    • Detach the cable from the motherboard by carefully pulling upward on the cable.

    Modifica

  10. Sony BDP-BX520 Port Board Replacement: passo 9, immagine 1 di 1

    • Using the Phillips #2 screwdriver, unscrew the silver, 8mm screw holding the board in place.

    Modifica

  11. Sony BDP-BX520 Port Board Replacement: passo 10, immagine 1 di 2 Sony BDP-BX520 Port Board Replacement: passo 10, immagine 2 di 2

    • Using the nylon or metal spudger, carefully unclip the port board from the side of the player.

    Modifica

  12. Sony BDP-BX520 Port Board Replacement: passo 11, immagine 1 di 1

    • Carefully pull the port board free from the Blu-Ray player.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 1 altro collaboratore

Collier

Membro da: 01/31/15

352 Reputazione

3 Guide realizzate

Distintivi: 4

+ 1 altro distintivo

Team

Cal Poly, Team 8-41, Amido Winter 2015 Membro di Cal Poly, Team 8-41, Amido Winter 2015

CPSU-AMIDO-W15S8G41

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 329