Aggiusta la tua roba Comunità Store

Sony BDP BX350 Motherboard Replacement

Introduzione

This is a step-by-step guide on how to replace your Sony BDP BX350 Device Motherboard. This guide is needed if the HDMI port or power input port are faulty. Make sure the disc assembly is taken out before starting this guide.

Cosa ti serve

  1. Sony BDP BX350 Motherboard Replacement, Disc Assembly: passo 1, immagine 1 di 1

    • Remove the three 10mm Philips head screws on the back of the player.

    Traduci

  2. Sony BDP BX350 Motherboard Replacement: passo 2, immagine 1 di 1

    • Using an opening tool lift up the tabs located on the bottom of the plastic front cover.

    Traduci

  3. Sony BDP BX350 Motherboard Replacement: passo 3, immagine 1 di 1

    • Lift the tabs located on each side of the device to free the front cover. Begin to separate the front and metal back covers.

    Traduci

  4. Sony BDP BX350 Motherboard Replacement: passo 4, immagine 1 di 1

    • Completely separate the front cover and the metal back cover from the grey casing.

    • The inner components should all be completely exposed after opening.

    Traduci

  6. Sony BDP BX350 Motherboard Replacement: passo 5, immagine 1 di 1

    • Unscrew the two 8mm Philips head screws securing the disc assembly to the main casing.

    Traduci

  7. Sony BDP BX350 Motherboard Replacement: passo 6, immagine 1 di 1

    • Pull the disc assembly out from under the metal tabs on the main casing.

    Traduci

  8. Sony BDP BX350 Motherboard Replacement: passo 7, immagine 1 di 1

    • Remove disc assembly.

    Traduci

  9. Sony BDP BX350 Motherboard Replacement, Motherboard: passo 8, immagine 1 di 2 Sony BDP BX350 Motherboard Replacement, Motherboard: passo 8, immagine 2 di 2

    • Do not bend or tear the ribbon cable.

    • Remove all five ribbon cables from the motherboard.

    Traduci

  10. Sony BDP BX350 Motherboard Replacement: passo 9, immagine 1 di 1

    • Unscrew 3mm Philips head HDMI screw from metal casing.

    Traduci

  11. Sony BDP BX350 Motherboard Replacement: passo 10, immagine 1 di 1

    • Unscrew the three 5mm Philips head screws from motherboard.

    • Separate the motherboard from the metal casing by pulling directly up. Use an opening tool if necessary.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 574