Salta al contenuto principale

Introduzione

This is a step-by-step guide on how to replace your Sony BDP BX350 Device Control Board. This guide is needed if the device control board or USB drive are faulty. Make sure the device is unplugged before starting this guide.

  1. Sony BDP BX350  Device Control Board Replacement, Control Board: passo 1, immagine 1 di 1
    • Remove the three 10mm Philips head screws on the back of the player.

  2. Sony BDP BX350  Device Control Board Replacement: passo 2, immagine 1 di 1
    • Using an opening tool lift up the tabs located on the bottom of the plastic front cover.

  3. Sony BDP BX350  Device Control Board Replacement: passo 3, immagine 1 di 1
    • Lift the tabs located on each side of the device to free the front cover. Begin separating the two covers from metal casing.

  4. Sony BDP BX350  Device Control Board Replacement: passo 4, immagine 1 di 1
    • Remove both covers.

  5. Sony BDP BX350  Device Control Board Replacement: passo 5, immagine 1 di 2 Sony BDP BX350  Device Control Board Replacement: passo 5, immagine 2 di 2
    • Do not bend or tear the ribbon cable.

    • Using the plastic tweezers, carefully remove the ribbon cable from the motherboard.

  6. Sony BDP BX350  Device Control Board Replacement: passo 6, immagine 1 di 1
    • Unscrew the one 5mm Phillips head screw from the front of the device board.

  7. Sony BDP BX350  Device Control Board Replacement: passo 7, immagine 1 di 2 Sony BDP BX350  Device Control Board Replacement: passo 7, immagine 2 di 2
    • Do not bend or tear ribbon cable.

    • Carefully separate the device control board from the metal casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 427