Aggiusta la tua roba Comunità Store

Sony Alpha NEX-C3 Back Panel Replacement

Introduzione

The back panel covers internal components. This guide will help remove it in order to access those components.

Cosa ti serve

  1. Sony Alpha NEX-C3 Back Panel Replacement, Back Panel: passo 1, immagine 1 di 1

    • Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.

    Modifica

  2. Sony Alpha NEX-C3 Back Panel Replacement: passo 2, immagine 1 di 2 Sony Alpha NEX-C3 Back Panel Replacement: passo 2, immagine 2 di 2

    • Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.

    Modifica

  4. Sony Alpha NEX-C3 Back Panel Replacement: passo 3, immagine 1 di 1

    • Tilt up the LCD screen.

    • Use a Phillips head 000 screwdriver to remove the two coarse 4.0mm screws near the bottom of the camera.

    Modifica

  5. Sony Alpha NEX-C3 Back Panel Replacement: passo 4, immagine 1 di 1

    • Gently pry off the back panel, by wiggling it around the LCD screen.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 838