Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Turn of camera by turning the switch to OFF.
    • Turn of camera by turning the switch to OFF.

  2. Use the finger, press and hold the release black circle button ( on the bottom ) next to the lens  on the front of the camera.
    • Use the finger, press and hold the release black circle button ( on the bottom ) next to the lens on the front of the camera.

  3. Using the left hand or the  right hand to hold the camera body, other hand twist the lens counterclockwise and pull it off. Align the white dot of the lens to the white dot on the camera mount to completely replace.
    • Using the left hand or the right hand to hold the camera body, other hand twist the lens counterclockwise and pull it off.

    • Align the white dot of the lens to the white dot on the camera mount to completely replace.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Vuong Nguyen

Membro da: 02/02/2017

119 Reputazione

1 Guida realizzata

Team

UW Tacoma, Team 1-4, Rose Winter 2017 Membro di UW Tacoma, Team 1-4, Rose Winter 2017

UWT-ROSE-W17S1G4

4 Membri

5 Guide realizzate

my camera will not recognize my lens, optical steady shot 1650. it used to work fine, but I dropped it. now the camera says it's not attached properly. any suggestions?

Connie - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 13

Tutti i Tempi: 883