Sony Alpha DSLR- A850 Veiwfinder Window Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

Your camera is a marvel of modern technology but a tiny rock or a stick can ruin it all. Don't let that happen to you. This viewfinder window is there to protect the more delicate optics behind the cover and is designed to take the hit so the more expensive pieces do not become damaged. Use this guide to replace this piece if you have damaged it accidently. If you damaged it on purpose... well... ok it is your camera whatever floats your boat man; you can still use this guide to replace the part however.

Cosa ti serve

Passo 1 Viewfinder Cover

Sony Alpha DSLR- A850 Veiwfinder Window Replacement, Viewfinder Cover: passo 1, immagine 1 di 1

Find the rubber viewfinder cover on the upper rear of the camera, above the view screen.

Traduci

Passo 2

Slide the rubber piece off.
There may be a slight popping sound.

Traduci

Passo 3

Once the rubber piece has been removed, inspect the area.
If everything looks fine, go ahead and slide the new rubber piece on the same way the old piece was slipped off.

Traduci

Passo 4 Viewfinder Window

Sony Alpha DSLR- A850 Veiwfinder Window Replacement, Viewfinder Window: passo 4, immagine 1 di 2

Sony Alpha DSLR- A850 Veiwfinder Window Replacement, Viewfinder Window: passo 4, immagine 2 di 2

After you have removed the viewfinder cover you can easily see the viewfinder window.

Traduci

Passo 5

Sony Alpha DSLR- A850 Veiwfinder Window Replacement: passo 5, immagine 3 di 3

Now you will have to put that screw driver to good use.
Be sure to remove all four screws and keep them somewhere you won't lose them.

Traduci

Passo 6

Grasp the side of the window with either a set of tweezers or your fingers. Lift upwards and slightly towards the base of the camera.
The should lift off and can now be easily replaced.

Traduci

Passo 7

to reinsert the window push inward and slightly forward. There is a tab on the camera that the window must catch on in order to be put into place.
Now simply repeat steps 3, 2 , and 1 in reverse order.

Traduci