Aggiusta la tua roba Comunità Store

Sonos Playbase IR Reciver Replacement

Introduzione

This guide shows how to replace the IR receiver of a Sonos Playbase, which receives signals from the television or other IR remote.

Cosa ti serve

  1. Sonos Playbase IR Reciver Replacement, Bottom Panel: passo 1, immagine 1 di 3 Sonos Playbase IR Reciver Replacement, Bottom Panel: passo 1, immagine 2 di 3 Sonos Playbase IR Reciver Replacement, Bottom Panel: passo 1, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Pro Tech Toolkit
    $74.95
    Compra

    • Turn the Playbase upside down so that the "Sonos Playbase" imprint is face up.

    • Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.

    • Melt the adhesive with an iOpener for ease of opening

    • Use a Metal Spudger if the plastic spudgers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

    Modifica

  2. Sonos Playbase IR Reciver Replacement: passo 2, immagine 1 di 2 Sonos Playbase IR Reciver Replacement: passo 2, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Pro Tech Toolkit
    $74.95
    Compra

    • Remove the fourteen 11mm T-10 screws by turning counter-clockwise.

    • Remove the seven 44mm T-20 screws by turning counter-clockwise.

    • Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.

    • Record where each screw belongs for easier reassembly.

    Modifica

  3. Sonos Playbase IR Reciver Replacement: passo 3, immagine 1 di 2 Sonos Playbase IR Reciver Replacement: passo 3, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Pro Tech Toolkit
    $74.95
    Compra

    • Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.

    • Use a metal spudger if plastic openers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

    Modifica

  4. Sonos Playbase IR Reciver Replacement, Main Speaker Array: passo 4, immagine 1 di 2 Sonos Playbase IR Reciver Replacement, Main Speaker Array: passo 4, immagine 2 di 2
    Modifica

  6. Sonos Playbase IR Reciver Replacement: passo 5, immagine 1 di 2 Sonos Playbase IR Reciver Replacement: passo 5, immagine 2 di 2

    • Remove the side speakers from the green printed circuit board (PCB) running along the top of the main speaker array by pinching and pulling out the connector.

    • See Recognizing & Disconnecting Cable Connectors for more information.

    Modifica

  7. Sonos Playbase IR Reciver Replacement: passo 6, immagine 1 di 3 Sonos Playbase IR Reciver Replacement: passo 6, immagine 2 di 3 Sonos Playbase IR Reciver Replacement: passo 6, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Pro Tech Toolkit
    $74.95
    Compra

    • Remove the two 16mm T-20 screws located on both sides of the main speaker array by turning counter-clockwise.

    Modifica

  8. Sonos Playbase IR Reciver Replacement: passo 7, immagine 1 di 1

    • Remove the main speaker array by gripping it on both sides and pulling it out.

    • The array may require a significant amount of force to remove.

    • Use prying tools as necessary to remove the main speaker array if you are unsuccessful using your hands.

    • Do not to yank the array out too suddenly or too far as this may damage the device.

    Modifica

  9. Sonos Playbase IR Reciver Replacement: passo 8, immagine 1 di 1

    • Prop the removed main speaker array up on top of the main circuit board.

    Modifica

  10. Sonos Playbase IR Reciver Replacement, IR Receiver: passo 9, immagine 1 di 3 Sonos Playbase IR Reciver Replacement, IR Receiver: passo 9, immagine 2 di 3 Sonos Playbase IR Reciver Replacement, IR Receiver: passo 9, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Pro Tech Toolkit
    $74.95
    Compra

    • Lift the main speaker array to reveal the IR receiver underneath.

    • Remove the three 11 mm T-5 screws by turning counter-clockwise.

    Modifica

  11. Sonos Playbase IR Reciver Replacement: passo 10, immagine 1 di 3 Sonos Playbase IR Reciver Replacement: passo 10, immagine 2 di 3 Sonos Playbase IR Reciver Replacement: passo 10, immagine 3 di 3
    Modifica

  12. Sonos Playbase IR Reciver Replacement: passo 11, immagine 1 di 2 Sonos Playbase IR Reciver Replacement: passo 11, immagine 2 di 2

    • Remove the IR receiver by grasping it with two fingers and pulling up.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

George Slivka

Membro da: 10/08/18

339 Reputazione

3 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

Cal Poly, Team S17-G2, White Fall 2018 Membro di Cal Poly, Team S17-G2, White Fall 2018

CPSU-WHITE-F18S17G2

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 12

Tutti i Tempi: 1,091