Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Strumenti

Parti

  1. Remove the rubber pads and unscrew
    • Remove the rubber pads and unscrew

  2. Take care not to damage the wires of the Wi-Fi antennas which are very bothersome.
    • Take care not to damage the wires of the Wi-Fi antennas which are very bothersome.

  3. By using a screwdriver inserted through each of the 8 peripheral slots, you can access the clips of the top cover. By using a screwdriver inserted through each of the 8 peripheral slots, you can access the clips of the top cover.
    • By using a screwdriver inserted through each of the 8 peripheral slots, you can access the clips of the top cover.

  4. Continue unscrewing (there is a screw under the seal).
    • Continue unscrewing (there is a screw under the seal).

  5. It's a soldered fuse. You will need to desolder it from the back in order to replace it.
    • It's a soldered fuse. You will need to desolder it from the back in order to replace it.

  6. About 1$
    • About 1$

    • 250V 5A T fuse (time delay).

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un ringraziamento speciale a questi traduttori:

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

YvesG

Membro da: 04/06/2018

239 Reputazione

2 Guide realizzate

Bravo

Ce tuto peux rendre service a des consommateurs abusés par la sociète Sonos .

Merci

bruno vinay - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 11

Tutti i Tempi: 360