Aggiusta la tua roba Comunità Store

Solving slow moving ceiling fan with remote control

Introduzione

If the ceiling fan comes with a remote control to switch on and off moving really slow at maximum speed. This video guide will definitely helps solving it.

Cosa ti serve

Panoramica Video

  1. Solving slow moving ceiling fan with remote control, Capacitor (depends on brand): passo 1, immagine 1 di 3 Solving slow moving ceiling fan with remote control, Capacitor (depends on brand): passo 1, immagine 2 di 3 Solving slow moving ceiling fan with remote control, Capacitor (depends on brand): passo 1, immagine 3 di 3

    • Specification for capacitor are sometimes printed at the size. This brand uses 0.82uF 275V capacitor. Specification varies with brand.

    Modifica

  2. Solving slow moving ceiling fan with remote control: passo 2, immagine 1 di 1

    • It will be so much easier if the board can be clamp down using the board repair clamp to hold the board while desoldering the correct capacitor.

    Modifica

  4. Solving slow moving ceiling fan with remote control: passo 3, immagine 1 di 1

    • Simple suction pump required to remove the molten fuse.

    Modifica

  5. Solving slow moving ceiling fan with remote control: passo 4, immagine 1 di 1

    • Cut off the excess length using a tiny cutter after a new capacitor is being soldered onto the board.

    Modifica

  6. Solving slow moving ceiling fan with remote control: passo 5, immagine 1 di 1

    • Test the fan if it is moving at maximum speed after the capacitor is being replaced before assembling it.

    Modifica
Conclusione

Test the board if working before reassembly the circuit board back into the ceiling fan.

Un commento

Not worth it, going to trash it & buy simple fan.

Joe W - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 58

Tutti i Tempi: 3,990