Introduzione

A rugged outdoor lifestyle may sometimes cause the cover, of your Solio Rocsta, to get dirty and/or damaged. In this guide, we will show you how to remove the top cover of the Solio Rocsta and replace it.

  1. Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver. Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.
    • Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Remove top cover. Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .
    • Remove top cover.

    • Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .

  4. Using the spudger, pry the solar panel off the cover.
    • Using the spudger, pry the solar panel off the cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Denis Laesker

Membro da: 10/10/2017

107 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S13-G13, Cagle Fall 2017 Membro di USF Tampa, Team S13-G13, Cagle Fall 2017

USFT-CAGLE-F17S13G13

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 24