Introduzione

A batteries' cycle life will only last for so many charges. In time the battery may no longer hold a charge to power your device. In this guide, we will show you how to change the battery of the Solio Rocsta.

  1. Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.
    • Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.

    Aggiungi Commento

  2. Remove top cover.
    • Remove top cover.

    • Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .

    Aggiungi Commento

    • Using the spudger, pry the battery off the back cover.

    Aggiungi Commento

    • Using a T6 Torx screwdriver, unscrew the 5.66 mm screws attaching the circuit board to the case and flip the circuit board.

    Aggiungi Commento

    • With the circuit board flipped, locate the battery connector.

    • Hold the component attached to the circuit board the battery is connected to and wiggle the cable out.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

David Vazquez

Membro da: 10/10/2017

529 Reputazione

5 Guide realizzate

Team

USF Tampa, Team S13-G13, Cagle Fall 2017 Membro di USF Tampa, Team S13-G13, Cagle Fall 2017

USFT-CAGLE-F17S13G13

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 37