Salta al contenuto principale

Strumenti

Ricambi

  1. The new shear bolt is stored on the top of the auger discharge
    • The new shear bolt is stored on the top of the auger discharge

  2. The shear bolt attaches the auger to the shaft The shear bolt is designed to break preventing damage to the auger and shaft if an hard object is pulled in Locate the side with the missing shear bolt
    • The shear bolt attaches the auger to the shaft

    • The shear bolt is designed to break preventing damage to the auger and shaft if an hard object is pulled in

    • Locate the side with the missing shear bolt

    • The left side is missing

    • This auger will spin freely on this side

    • Rotate the auger to find where the bolt is on the shaft

  3. Use the new shear bolt to push the old broken bolt out of the shaft It should fall out and look like this
    • Use the new shear bolt to push the old broken bolt out of the shaft

    • It should fall out and look like this

  4. With the new bolt in place from pushing the old bolt out add a nut Hand tighten
    • With the new bolt in place from pushing the old bolt out add a nut

    • Hand tighten

  5. Using two 7/16" wrenches tighten the nut on the bolt Do not over tighten
    • Using two 7/16" wrenches tighten the nut on the bolt

    • Do not over tighten

    • Congratulations, both shear bolts have been replaced

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Jacob Rattray

Membro da: 11/05/2018

263 Reputazione

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 181