Salta al contenuto principale

Introduzione

The purpose of this guide is to show the steps necessary to remove the casing of the Slingbox and replace the motherboard.

Parti

Nessuna parte specificata.

  1. Use the plastic opening tool to remove the four rubber pads from the bottom of the device.
    • Use the plastic opening tool to remove the four rubber pads from the bottom of the device.

  2. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  3. The Slingbox has four black 5mm screws, one on each corner of the case. Remove the four black 5mm screws using the PH1 screwdriver. Gently pull and separate the two case covers.
    • The Slingbox has four black 5mm screws, one on each corner of the case.

    • Remove the four black 5mm screws using the PH1 screwdriver.

    • Gently pull and separate the two case covers.

  4. The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox. Remove the five silver screws on the motherboard using the PH1 screwdriver. Gently slide and separate the motherboard from the base.
    • The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox.

    • Remove the five silver screws on the motherboard using the PH1 screwdriver.

    • Gently slide and separate the motherboard from the base.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

IUPUI, Team 2-2, Harley SU 2016 Membro di IUPUI, Team 2-2, Harley SU 2016

IUPUI-HARLEY-SU16S2G2

5 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 10

Tutti i Tempi: 331