Salta al contenuto principale

Skytex SP728 Antenna Replacement

Cosa ti serve

  1. Skytex SP728 Antenna Replacement, Case: passo 1, immagine 1 di 1
    • Make sure the device is powered off

    • Rotate the device so the ports and screws face you

  2. Skytex SP728 Antenna Replacement: passo 2, immagine 1 di 1
    • Using a small phillips screwdriver, unscrew both end screws

  3. Skytex SP728 Antenna Replacement: passo 3, immagine 1 di 1
    • Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device

  4. Skytex SP728 Antenna Replacement: passo 4, immagine 1 di 1
    • Once the case has been loosened, pry the backing off gently with your hands.

    • Make sure to remove the case gently as extra force can break the clasps or the case itself.

  5. Skytex SP728 Antenna Replacement, Antenna: passo 5, immagine 1 di 1
    • Remove the case and open the device

  6. Skytex SP728 Antenna Replacement: passo 6, immagine 1 di 1
    • Remove the black tapes

  7. Skytex SP728 Antenna Replacement: passo 7, immagine 1 di 1
    • Use the soldering station and remove soldered connections to the antenna wires.

    • Now replace the antenna.

    • Follow the link below for additional soldering information "https://www.ifixit.com/Guide/How+To+Sold...

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team 5-1, Brown Winter 2015 Membro di USF Tampa, Team 5-1, Brown Winter 2015

USFT-BROWN-W15S5G1

4 Membri

11 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 98