Salta al contenuto principale

Sky Thunder HD 8500WH Gear Replacement

Cosa ti serve

  1. Sky Thunder HD 8500WH Gear Replacement, Rotor Blade: passo 1, immagine 1 di 3 Sky Thunder HD 8500WH Gear Replacement, Rotor Blade: passo 1, immagine 2 di 3 Sky Thunder HD 8500WH Gear Replacement, Rotor Blade: passo 1, immagine 3 di 3
    • Place the drone with the top side facing up.

    • Remove the blade cover.

    • Remove the rotor blade.

  2. Sky Thunder HD 8500WH Gear Replacement, Lockstitch: passo 2, immagine 1 di 2 Sky Thunder HD 8500WH Gear Replacement, Lockstitch: passo 2, immagine 2 di 2
    • Unscrew the 1cm screw holding in the blade lockstitch with the Phillips 0 Screwdriver.

    • Remove the blade lockstitch.

  3. Sky Thunder HD 8500WH Gear Replacement, Lower and Upper Body: passo 3, immagine 1 di 3 Sky Thunder HD 8500WH Gear Replacement, Lower and Upper Body: passo 3, immagine 2 di 3 Sky Thunder HD 8500WH Gear Replacement, Lower and Upper Body: passo 3, immagine 3 di 3
    • Lay down the drone so the battery side is facing up.

    • Unscrew all 5 .8cm screws on each arm of the drone with the Phillips 0 Screwdriver.

    • Repeat previous bullet for each arm (20 screws in total).

  4. Sky Thunder HD 8500WH Gear Replacement: passo 4, immagine 1 di 2 Sky Thunder HD 8500WH Gear Replacement: passo 4, immagine 2 di 2
    • Using a bit of force, gently pull apart the lower and upper bodies.

    • Keep going until both parts are completely separated.

  5. Sky Thunder HD 8500WH Gear Replacement, Gear: passo 5, immagine 1 di 2 Sky Thunder HD 8500WH Gear Replacement, Gear: passo 5, immagine 2 di 2
    • Find the gear mechanism at the end of one of the drone arms.

    • Unscrew the two front .8cm screws with the Phillips 0 Screwdriver.

  6. Sky Thunder HD 8500WH Gear Replacement: passo 6, immagine 1 di 2 Sky Thunder HD 8500WH Gear Replacement: passo 6, immagine 2 di 2
    • Remove the white spacer.

    • Remove the red spacer.

  7. Sky Thunder HD 8500WH Gear Replacement: passo 7, immagine 1 di 1
    • Pull the gear out from the bottom of the holding mechanism.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 135