Salta al contenuto principale

Sidekick II Thumbwheel Replacement

Cosa ti serve

  1. Sidekick II Thumbwheel Replacement, Outer Casing: passo 1, immagine 1 di 1
    • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

    • Gently pry open button and remove button.

    • Do this for each of the 3 buttons remaining.

  2. Sidekick II Thumbwheel Replacement: passo 2, immagine 1 di 2 Sidekick II Thumbwheel Replacement: passo 2, immagine 2 di 2
    • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

  3. Sidekick II Thumbwheel Replacement: passo 3, immagine 1 di 1
    • Use the T6 Torx Screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

  4. Sidekick II Thumbwheel Replacement: passo 4, immagine 1 di 1
    • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

    • Use the Torx 6 screwdriver to remove these 2 screws.

    • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

  5. Sidekick II Thumbwheel Replacement: passo 5, immagine 1 di 1
    • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

    • You can use your hands to simply pull apart the top casing from the bottom casing.

  6. Sidekick II Thumbwheel Replacement, Thumbwheel: passo 6, immagine 1 di 1
    • Remove 2 screws using the Torx 6 screwdriver.

  7. Sidekick II Thumbwheel Replacement: passo 7, immagine 1 di 1
    • The thumbwheel and casing will be loose, gently remove it.

Linea Traguardo

Team

Cal Poly, Team 3-19, Maness Winter 2010 Membro di Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Membri

11 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,151