Sidekick II Outer Casing Replacement - Guida di riparazione iFixit

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

Taking apart the outside casing.

Cosa ti serve

Passo 1 Outer Casing

Sidekick II Outer Casing Replacement, Outer Casing: passo 1, immagine 1 di 1

Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
Gently pry open button and remove button.
Do this for each of the 3 buttons remaining.

Passo 2

Sidekick II Outer Casing Replacement: passo 2, immagine 1 di 2

Sidekick II Outer Casing Replacement: passo 2, immagine 2 di 2

The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

Passo 3

Sidekick II Outer Casing Replacement: passo 3, immagine 1 di 1

Use the T6 Torx Screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

Passo 4

Sidekick II Outer Casing Replacement: passo 4, immagine 1 di 1

Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.
Use the Torx 6 screwdriver to remove these 2 screws.
Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

Passo 5

Sidekick II Outer Casing Replacement: passo 5, immagine 1 di 1

After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.
You can use your hands to simply pull apart the top casing from the bottom casing.

Linea Traguardo

Autore

con 7 altri collaboratori

michael albaum

Membro da: 01/20/10

87 Reputazione

6 Guide realizzate

+6 altri distintivi

Team

Cal Poly, Team 3-19, Maness Winter 2010 Membro di Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Membri

11 Guide realizzate

0 Commenti

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 9

Tutti i Tempi: 2,385