Salta al contenuto principale

Introduzione

Taking out the LCD screen.

Parti

Nessuna parte specificata.

  1. Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
    • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

    • Gently pry open button and remove button.

    • Do this for each of the 3 buttons remaining.

  2. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
    • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

  3. Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.
    • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

  4. Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.
    • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

    • Use the Torx 6 screwdriver to remove these 2 screws.

    • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

  5. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  6. After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.
    • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

    • You can use your hands to simply pull apart the top casing from the bottom casing.

  7. Flip the screen to its up position. Remove screen from keyboard.
    • Flip the screen to its up position.

    • Remove screen from keyboard.

  8. Remove 4 screws from back of screen.
    • Remove 4 screws from back of screen.

  9. Separate screen from housing with your fingers.
    • Separate screen from housing with your fingers.

  10. Remove 4 screws Pay attention to the orientation of the screen on the backing because it is difficult to reassemble. Pay attention to the orientation of the screen on the backing because it is difficult to reassemble.
    • Remove 4 screws

    • Pay attention to the orientation of the screen on the backing because it is difficult to reassemble.

  11. Remove LCD protective cover with your fingers.
    • Remove LCD protective cover with your fingers.

Linea Traguardo

Altre 2 persone hanno completato questa guida.

michael albaum

Membro da: 20/01/2010

45 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 3-19, Maness Winter 2010 Membro di Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 3,235