Introduzione

For this repair, you will learn how to replace a motherboard. An important aspect would be knowing how to use the soldering iron.

  1. Remove the suction pad by pulling the  suction out of the slot that it is in. Remove the suction pad by pulling the  suction out of the slot that it is in.
    • Remove the suction pad by pulling the suction out of the slot that it is in.

  2. Remove  the four 9.09mm Philips #1 screws that hold the 2 pieces of the cover together.
    • Remove the four 9.09mm Philips #1 screws that hold the 2 pieces of the cover together.

    • Pull apart the two halves.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Hold the base and pull up on the battery.
    • Hold the base and pull up on the battery.

  5. Remove the four 5mm Phillips #1 screws from the motherboard. Desolder the two wires connecting the battery tp the motherboard. Desolder the two wires connecting the battery tp the motherboard.
    • Remove the four 5mm Phillips #1 screws from the motherboard.

    • Desolder the two wires connecting the battery tp the motherboard.

  6. Desolder the four remaining wires that are connected to the motherboard.
    • Desolder the four remaining wires that are connected to the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Matthew Dunkle

Membro da: 21/05/2018

192 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G1, Harley Spring 2018 Membro di IUPUI, Team S1-G1, Harley Spring 2018

IUPUI-HARLEY-S18S1G1

7 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 112