Introduzione

For this repair you will learn how to replace a battery, one topic that will need to be understood is how to use a soldering iron. Being able to use that will have a big effect on replacing the battery.

  1. Remove the suction pad by pulling the  suction out of the slot that it is in.
    • Remove the suction pad by pulling the suction out of the slot that it is in.

    Aggiungi Commento

  2. Remove  the four 9.09mm Philips #1 screws that hold the 2 pieces of the cover together.
    • Remove the four 9.09mm Philips #1 screws that hold the 2 pieces of the cover together.

    • Pull apart the two halves.

    Aggiungi Commento

    • Hold the base and pull up on the battery.

    Aggiungi Commento

    • Remove the four 5mm Phillips #1 screws from the motherboard.

    • Desolder the two wires connecting the battery tp the motherboard.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Matthew Dunkle

Membro da: 21/05/2018

192 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G1, Harley Spring 2018 Membro di IUPUI, Team S1-G1, Harley Spring 2018

IUPUI-HARLEY-S18S1G1

7 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 132