Introduzione

Speakers rely on precisely placed components to convert electronic signals into sound waves. Touching the speaker by pushing or pulling can cause the speaker components to deform. As a result, the speaker will no longer produce an accurate sound. Replacing the speaker is the best repair for speaker damage.

  1. Unplug the speaker before doing any work on it. Use a #0 Phillips screwdriver to remove the eight 13mm Phillips head screws from the back panel.
    • Unplug the speaker before doing any work on it.

    • Use a #0 Phillips screwdriver to remove the eight 13mm Phillips head screws from the back panel.

  2. Remove the back panel.
    • Remove the back panel.

  3. Remove the snap cable that connects the speaker to the circuit board.
    • Remove the snap cable that connects the speaker to the circuit board.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Use a tap hammer and a punch to release the 4 posts that hold the front panel in place. Use a tap hammer and a punch to release the 4 posts that hold the front panel in place.
    • Use a tap hammer and a punch to release the 4 posts that hold the front panel in place.

  6. Use a plastic opening tool or spudger to pry off the front panel. Use a plastic opening tool or spudger to pry off the front panel.
    • Use a plastic opening tool or spudger to pry off the front panel.

  7. Use a#4 Phillips screwdriver to remove the four 9.5mm screws that secure the subwoofer to the woofer box.
    • Use a#4 Phillips screwdriver to remove the four 9.5mm screws that secure the subwoofer to the woofer box.

  8. Remove the defective speaker.
    • Remove the defective speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Linda Freund

Membro da: 06/08/2017

205 Reputazione

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 142