Introduzione

I am not responsible for anything in this article.

  1. Remove - Back,microSD,battery,sim
    • Remove - Back,microSD,battery,sim

    • Remove black rubber screw covers on back of display.

    • Remove 000 phillips screws (4) from top of display.

    Aggiungi Commento

  2. Remove 3 small silver screws from battery area.
    • Remove 3 small silver screws from battery area.

    • Remove 2 Torx t-7's by MicroSD slot.

    • After screws are removed you can detach screen.

    Aggiungi Commento

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove 4 additional 000 phillips screws from display.

    • Using some heat,spudger,frce pry away the broken display from the frame.

    • Use extreme caution the actual display is very fragile.

    Aggiungi Commento

    • Remove connector for digitizer

    • replace connector with new digitizer and rebuild.

    Aggiungi Commento

    • Reconnect to main motherboard.

    Aggiungi Commento

    • reassemble.

    • Enjoy the new display

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

jckoniecki

Membro da: 08/11/2010

51 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 3,241