Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Introduzione
Quando la tua Shark Rotator Powered Lift-Away (NV755) risulta difficile da manovrare o non riesce a prendere lo sporco, ispeziona la spazzola se sono presenti danni o occlusioni. Un ostruzione eccessiva causerà all'aspirapolvere a non funzionare come si deve.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push the lift away button and pull the handle up to separate the body from the wand section.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push lift away button on the wand then lift up on the top section to separate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Tilt the wand shaft backwards for convenient.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lay the head nozzle piece upside down.
-
Rotate the three gray taps to the unlock position.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With your fingers, pry and pull the brush cage open.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 13 screws (circled in yellow) using a phillips screwdriver.
-
Remove the one screw (circled in red) that has a Torx head (might be Phillips head on some models).
-
Remove the horizontal screw (circled in orange) that attaches the gray side panel (necessary to remove the white cap on the roller brush in step 8)
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift up the top cover now that all of the screws have been removed.
-
-
-
Rimuovi il tappo con un cacciavite a spacco o con qualsiasi altro utensile che possa fare leva.
-
Per rimontare il tuo dispositivo, segui queste istruzioni in ordine inverso.
Per rimontare il tuo dispositivo, segui queste istruzioni in ordine inverso.
Annulla: non ho completato questa guida.
Altre 12 persone hanno completato questa guida.
Un ringraziamento speciale a questi traduttori:
100%
Domenyck Paoly ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›
19 Commenti
Same. Need a new brush bar.
I appreciate the info you had posted. It was easy to follow and helped me to save money on buying a new vacuum!
I have the same question. Where can I find the brushbar to the Shark Rotator Professional lift-away mv650?
i’m getting a little frustrated because my carpet’s pile is not getting lifted and cleaned.
Venette
7 August 2019
Does anyone get a reply?