Salta al contenuto principale

Shark Rotator Lift-Away Speed Brushroll Replacement

Cosa ti serve

  1. Shark Rotator Lift-Away Speed Brushroll Replacement, Brushroll: passo 1, immagine 1 di 1
    • Make sure the vacuum is turned off and unplugged before proceeding.

    • Locate the release button at the top of the vacuum pod next to the handle.

    • Use the handle to lift the pod up off of the vacuum nozzle while pressing the release button.

    • Removing the pod is optional, but it may be easier to locate blockages or access the motor and belt if you do so.

  2. Shark Rotator Lift-Away Speed Brushroll Replacement: passo 2, immagine 1 di 2 Shark Rotator Lift-Away Speed Brushroll Replacement: passo 2, immagine 2 di 2
    • Press the Brushroll Access buttons on the top of the nozzle to reveal the brushroll compartment.

  3. Shark Rotator Lift-Away Speed Brushroll Replacement: passo 3, immagine 1 di 2 Shark Rotator Lift-Away Speed Brushroll Replacement: passo 3, immagine 2 di 2
    • Lift the brushroll out by using the pull-tab on the left side.

    • You can test the brushroll once it has been inserted by plugging the vacuum in and running the vacuum in carpet mode. The brushroll indicator light should be a solid green color.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team S15-G7, Livingston Fall 2017 Membro di Cal Poly, Team S15-G7, Livingston Fall 2017

CPSU-LIVINGSTON-F17S15G7

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,800