Aggiusta la tua roba Comunità Store

Shark Rocket Professional Hose Replacement

Introduzione

Does your vacuum fail to pick up particles on your floor? If so, this guide outlines how to remove the two vacuum tubes on the Shark Rocket Professional. While reading this guide, you will also learn how to unclog your vacuum to improve suction.

Cosa ti serve

  1. Shark Rocket Professional Hose Replacement, Main Hose: passo 1, immagine 1 di 3 Shark Rocket Professional Hose Replacement, Main Hose: passo 1, immagine 2 di 3 Shark Rocket Professional Hose Replacement, Main Hose: passo 1, immagine 3 di 3

    • Look at the Shark Rocket Professional's Extension Rod.

    • Identify where the hose connects to the main body of the vacuum.

    • Press the tabs on the sides of the connector to remove the hose.

    • You can use a long, thin object to unclog the hose.

    • If this fixes your problem, then you are finished with this guide.

    Modifica

  2. Shark Rocket Professional Hose Replacement: passo 2, immagine 1 di 2 Shark Rocket Professional Hose Replacement: passo 2, immagine 2 di 2

    • Look at the vacuum handle and locate the orange button that says "Handle" with a picture of a lock.

    • Press the button and remove the handle.

    Modifica

  4. Shark Rocket Professional Hose Replacement: passo 3, immagine 1 di 2 Shark Rocket Professional Hose Replacement: passo 3, immagine 2 di 2

    • Look at the vacuum handle.

    • Using a T-15 screwdriver, remove the five 15mm screws in the handle by turning them counter-clockwise.

    Modifica

  5. Shark Rocket Professional Hose Replacement: passo 4, immagine 1 di 3 Shark Rocket Professional Hose Replacement: passo 4, immagine 2 di 3 Shark Rocket Professional Hose Replacement: passo 4, immagine 3 di 3

    • Use a plastic opening tool to pry open the handle.

    • Don't worry if the handle sounds like it is going to break; it takes a lot of force to pull apart.

    • When popping open your handle, the small grey piece of plastic(pictured in the last frame) will fly out.

    Modifica

  6. Shark Rocket Professional Hose Replacement: passo 5, immagine 1 di 3 Shark Rocket Professional Hose Replacement: passo 5, immagine 2 di 3 Shark Rocket Professional Hose Replacement: passo 5, immagine 3 di 3

    • The orange plastic piece may have naturally fallen out at this point.

    • Look a your handle.

    • Using your hands, pull the tube from the nozzle of the handle.

    • The tube is soldered onto a wire connecting to the plastic orange piece inside the handle.

    • Cut this connection with wire clippers to remove and replace your tube.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Brad Iglesia

Membro da: 01/24/18

316 Reputazione

2 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

Cal Poly, Team S18-G6, Livingston Winter 2018 Membro di Cal Poly, Team S18-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G6

4 Membri

10 Guide realizzate

4 Commenti

How about an expla8nation about how t9 actually do the lower the hose inside the brush head

Jonathan Hill - Replica

How do you replace the hose in the beater head

daveve2 -

Thank you for this, this guide helped a ton.

Bradlee Johnson - Replica

How long does it take to answer acquestion?

daveve2 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 40

Tutti i Tempi: 5,846