Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Shark Rocket Professional HEPA Filter Replacement

  1. Shark Rocket Professional HEPA Filter Replacement, HEPA Filter: passo 1, immagine 1 di 2 Shark Rocket Professional HEPA Filter Replacement, HEPA Filter: passo 1, immagine 2 di 2
    • Look towards the side of the vacuum for the orange "Floor Nozzle" button.

    • Press the "Floor Nozzle" button and pull out the body of the vacuum up and away from the floor motor.

  2. Shark Rocket Professional HEPA Filter Replacement: passo 2, immagine 1 di 3 Shark Rocket Professional HEPA Filter Replacement: passo 2, immagine 2 di 3 Shark Rocket Professional HEPA Filter Replacement: passo 2, immagine 3 di 3
    • Locate an orange dial at the bottom of the now-separate body of the vacuum.

    • Turn the dial so that it is pointed towards the open-lock icon.

  3. Shark Rocket Professional HEPA Filter Replacement: passo 3, immagine 1 di 3 Shark Rocket Professional HEPA Filter Replacement: passo 3, immagine 2 di 3 Shark Rocket Professional HEPA Filter Replacement: passo 3, immagine 3 di 3
    • Open the cap to reveal the HEPA filter. The HEPA filter is a large grey rectangle with a tab on the side.

    • Press the tab, and pull out the filter.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

David Chau

Membro da: 01/24/18

130 Reputazione

1 Guida realizzata

Team

Cal Poly, Team S18-G6, Livingston Winter 2018 Membro di Cal Poly, Team S18-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G6

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 22

Tutti i Tempi: 2,658