Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will teach you how to replace or fix the floor hose of your Shark Rocket Professional Vacuum.

Parti

Nessuna parte specificata.

  1. Look at the side of your vacuum. Identify the button that says "Floor Nozzle."
    • Look at the side of your vacuum.

    • Identify the button that says "Floor Nozzle."

    • Press this button and remove the main body of the vacuum.

  2. Look at the bottom of the Floor Nozzle. Use a coin to turn the orange locking dials counter-clockwise. If you are unsure, follow the arrows when turning the orange dials because the labeling is confusing.
    • Look at the bottom of the Floor Nozzle.

    • Use a coin to turn the orange locking dials counter-clockwise.

    • If you are unsure, follow the arrows when turning the orange dials because the labeling is confusing.

  3. Use your fingers to pull open the panel locked by the orange mechanism.
    • Use your fingers to pull open the panel locked by the orange mechanism.

    • If there is debris stuck in the tube, use a long, thin object to remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Brad Iglesia

Membro da: 24/01/2018

265 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S18-G6, Livingston Winter 2018 Membro di Cal Poly, Team S18-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G6

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 64

Tutti i Tempi: 2,417