Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Shark Rocket Powerhead AH401 Filter Grille Replacement

Cosa ti serve

  1. Shark Rocket Powerhead AH401 Filter Grille Replacement, Dust Cup: passo 1, immagine 1 di 3 Shark Rocket Powerhead AH401 Filter Grille Replacement, Dust Cup: passo 1, immagine 2 di 3 Shark Rocket Powerhead AH401 Filter Grille Replacement, Dust Cup: passo 1, immagine 3 di 3
    • Ensure the device is turned off and unplugged from any power source before beginning work.

    • Push down on the dust can lever to release the dust can in order to get to the filter grill.

  2. Shark Rocket Powerhead AH401 Filter Grille Replacement: passo 2, immagine 1 di 2 Shark Rocket Powerhead AH401 Filter Grille Replacement: passo 2, immagine 2 di 2
    • Remove the dust cup by lifting it off the dock.

  3. Shark Rocket Powerhead AH401 Filter Grille Replacement, Filter Grille: passo 3, immagine 1 di 2 Shark Rocket Powerhead AH401 Filter Grille Replacement, Filter Grille: passo 3, immagine 2 di 2
    • Push inward on the top of the filter grille where it says "Push."

    • Lift the filter grille upward.

  4. Shark Rocket Powerhead AH401 Filter Grille Replacement: passo 4, immagine 1 di 2 Shark Rocket Powerhead AH401 Filter Grille Replacement: passo 4, immagine 2 di 2
    • Lift gently and pull the grille up towards you until it releases.

    • The post-motor filter is underneath the filter grille.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team S19-G3, Livingston Winter 2018 Membro di Cal Poly, Team S19-G3, Livingston Winter 2018

CPSU-LIVINGSTON-W18S19G3

4 Membri

18 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 6

Tutti i Tempi: 298