Introduzione

This guide will show you how to replace the filter grille if it becomes damaged, does not remain in place, or if you need to reach the Post-Motor filter.

Strumenti

Nessun attrezzo richiesto.

Ensure the device is turned off and unplugged from any power source before beginning work.
  • Ensure the device is turned off and unplugged from any power source before beginning work.

  • Push down on the dust can lever to release the dust can in order to get to the filter grill.

Aggiungi Commento

Remove the dust cup by lifting it off the dock.
  • Remove the dust cup by lifting it off the dock.

Aggiungi Commento

  • Push inward on the top of the filter grille where it says "Push."

  • Lift the filter grille upward.

Aggiungi Commento

  • Lift gently and pull the grille up towards you until it releases.

  • The post-motor filter is underneath the filter grille.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Shobhit Dabral

Membro da: 24/01/2018

712 Reputazione

6 Guide realizzate

Team

Cal Poly, Team S19-G3, Livingston Winter 2018 Membro di Cal Poly, Team S19-G3, Livingston Winter 2018

CPSU-LIVINGSTON-W18S19G3

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 49