Aggiusta la tua roba Comunità Store

Shark Rocket HV381 Brush Replacement

Introduzione

This guide will tell you step by step how to replace a malfunctioning Brush. on the Shark Rocket HV381.

  1. Shark Rocket HV381 Brush Replacement, Brush: passo 1, immagine 1 di 2 Shark Rocket HV381 Brush Replacement, Brush: passo 1, immagine 2 di 2

    • On the top of the vacuum head is two grey "Brush Roller Access" buttons. Simultaneously press both buttons to eject the Roller Cover. Remove the Roller Cover by pulling it towards you and up.

    Modifica

  3. Shark Rocket HV381 Brush Replacement: passo 2, immagine 1 di 3 Shark Rocket HV381 Brush Replacement: passo 2, immagine 2 di 3 Shark Rocket HV381 Brush Replacement: passo 2, immagine 3 di 3

    • The "Pull Tab" tab is located at the right. Pull the Tab up and to the right for removal.

    • The Brush is sticky so hold the vacuum head with one hand and give the tab a moderate tug.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 687