Shark Professional Steam Pocket Mop Water Tank Cap Replacement

Introduzione

Mineral buildup can occur when the water tank cap is not loosened before storing or if the tank is not drained. In these situations the cap can become stuck inside the tank. When this occurs, the cap is often lost or misplaced, which leads to a replacement.

Passo 1 Water Tank Cap

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: passo 1, immagine 1 di 2

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: passo 1, immagine 2 di 2

Turn off the Steam Pocket Mop and unplug it from the wall.
Be sure that the water in the water tank cools to room temperature before proceeding.

Modifica

Passo 2

Shark Professional Steam Pocket Mop Water Tank Cap Replacement: passo 2, immagine 3 di 3

Remove the water tank cap from the water tank reservoir.
Turn the cap towards the upward position.
Rotate counter-clockwise until it loosens.
When reassembling, align the grooves of new water tank cap with the opening of water tank reservoir and then push in.

Modifica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Tyler Wicke

Membro da: 10/17/18

237 Reputazione

2 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

UW Tacoma, Team S1-G3, Rose Fall 2018 Membro di UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Membri

10 Guide realizzate

12 Commenti

Need a water cap for S3901 N3 11 Shark steam mop. They said they discontinued and I have ordered two online and neither will work. And I really going to have to buy a new one?

shannon poole - 9 feb 2019 Replica