Aggiusta la tua roba Comunità Store

Shark Professional Steam Pocket Mop Head Replacement

Introduzione

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. Shark Professional Steam Pocket Mop Head Replacement, Mop Head: passo 1, immagine 1 di 2 Shark Professional Steam Pocket Mop Head Replacement, Mop Head: passo 1, immagine 2 di 2

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

    Modifica

  3. Shark Professional Steam Pocket Mop Head Replacement: passo 2, immagine 1 di 3 Shark Professional Steam Pocket Mop Head Replacement: passo 2, immagine 2 di 3 Shark Professional Steam Pocket Mop Head Replacement: passo 2, immagine 3 di 3

    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Tyler Wicke

Membro da: 10/17/18

237 Reputazione

2 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

UW Tacoma, Team S1-G3, Rose Fall 2018 Membro di UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 35

Tutti i Tempi: 1,849