Salta al contenuto principale

Shark Navigator Lightweight Upright Dust Cup Replacement

  1. Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: passo 1, immagine 1 di 2 Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: passo 1, immagine 2 di 2
    • Press down on the black, rubber ballish button located on the top of the vacuum.

    • Pull back simultaneous on the plastic handle and remove the dust container.

  2. Shark Navigator Lightweight Upright Dust Cup Replacement: passo 2, immagine 1 di 3 Shark Navigator Lightweight Upright Dust Cup Replacement: passo 2, immagine 2 di 3 Shark Navigator Lightweight Upright Dust Cup Replacement: passo 2, immagine 3 di 3
    • Press the plastic tab in, located on the front of the dust container.

    • Pull up simultaneously on the plastic handle.

  3. Shark Navigator Lightweight Upright Dust Cup Replacement: passo 3, immagine 1 di 2 Shark Navigator Lightweight Upright Dust Cup Replacement: passo 3, immagine 2 di 2
    • Remove the dust cup from the inside of the dust container.

  4. Shark Navigator Lightweight Upright Dust Cup Replacement: passo 4, immagine 1 di 3 Shark Navigator Lightweight Upright Dust Cup Replacement: passo 4, immagine 2 di 3 Shark Navigator Lightweight Upright Dust Cup Replacement: passo 4, immagine 3 di 3
    • Push in the red tab located on the side of the dust cup.

    • Open the dust cup simultaneously with the cone-half pointing downwards.

    • Separate the two halves.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kahye Yu

Membro da: 10/02/17

446 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S4-G6, Livingston Fall 2017 Membro di Cal Poly, Team S4-G6, Livingston Fall 2017

CPSU-LIVINGSTON-F17S4G6

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 83

Tutti i Tempi: 3,252