Introduzione

If your roller brush is not working even after removing surrounding debris, it is time to replace the roller brush.

Parti

Nessuna parte richiesta.

  1. Remove the black rubber band from the roller brush
    • Remove the black rubber band from the roller brush

    • In most models there will be a plastic cover over the rubber band. You will use the quarter to twist the latch and take off the cover

    Aggiungi Commento

  2. Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.
    • Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.

    Aggiungi Commento

    • Slide the roller belt off of the roller brush and pull the roller away from the motorized brush.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Zachary Liu

Membro da: 24/01/2018

499 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S1-G5, Livingston Winter 2018 Membro di Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

4 Membri

5 Guide realizzate

but where can I buy the brush for model SV1106?

ellenmccarthycalif - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 48

Tutti i Tempi: 329