Introduzione

Replace your dust filter when cleaning it does not improve the vacuum's suction, or when the vacuum will not suck the debris.

Strumenti

Nessun attrezzo richiesto.

Parti

Nessuna parte richiesta.

  1. Push the grey button on top of the dust cup canister and pull the canister off at the same time. Make sure the dust cup is empty and the vacuum is off before replacing. Make sure the dust cup is empty and the vacuum is off before replacing.
    • Push the grey button on top of the dust cup canister and pull the canister off at the same time.

    • Make sure the dust cup is empty and the vacuum is off before replacing.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Press the grey clip at the bottom of the dust cup to open the dust cup. Press the grey clip at the bottom of the dust cup to open the dust cup.
    • Press the grey clip at the bottom of the dust cup to open the dust cup.

  4. Pinch and lift out the filter. Pinch and lift out the filter.
    • Pinch and lift out the filter.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Zachary Liu

Membro da: 24/01/2018

508 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S1-G5, Livingston Winter 2018 Membro di Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 19

Ultimi 30 Giorni: 68

Tutti i Tempi: 489