Introduzione

Replace the battery when the vacuum does not turn on even after charging.

  1. Turn the device over to reveal the bottom of the motorized brush head.
    • Turn the device over to reveal the bottom of the motorized brush head.

  2. Slide the latch next to the panel upwards into the unlocked position. Slide the latch next to the panel upwards into the unlocked position.
    • Slide the latch next to the panel upwards into the unlocked position.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Slide the panel to the right to reveal the battery.
    • Slide the panel to the right to reveal the battery.

  5. Pull the battery from the vacuum. Pull the battery from the vacuum.
    • Pull the battery from the vacuum.

  6. Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart. Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.
    • Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Zachary Liu

Membro da: 24/01/2018

508 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S1-G5, Livingston Winter 2018 Membro di Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

3 Membri

5 Guide realizzate

How much is the part for the shark

sumi49 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 49

Ultimi 30 Giorni: 220

Tutti i Tempi: 2,707