Introduzione

You will need to remove the top component to access the motor and motherboard.

Parti

Nessuna parte richiesta.

  1. Remove the four 15 mm T10 screws on the underside of the vacuum.
    • Remove the four 15 mm T10 screws on the underside of the vacuum.

  2. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Using the plastic spudger, pry the back seam of the top component to pop it off the vacuum. Using the plastic spudger, pry the back seam of the top component to pop it off the vacuum.
    • Using the plastic spudger, pry the back seam of the top component to pop it off the vacuum.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team S17-G5, White Fall 2018 Membro di Cal Poly, Team S17-G5, White Fall 2018

CPSU-WHITE-F18S17G5

4 Membri

11 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 10

Tutti i Tempi: 47