Salta al contenuto principale

Introduzione

You will need a T10 Security Torx screwdriver and an iFixit Opening Tool to open the side components.

  1. Open the garage door by sliding both of the release buttons away from you. Lift off the garage door.
    • Open the garage door by sliding both of the release buttons away from you.

    • Lift off the garage door.

  2. Remove the plastic screw covering using a metal spudger by pushing the sharp side into the crevice and prying the cover out. Remove the plastic screw covering using a metal spudger by pushing the sharp side into the crevice and prying the cover out.
    • Remove the plastic screw covering using a metal spudger by pushing the sharp side into the crevice and prying the cover out.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Turn the T10 Security Torx screwdriver counterclockwise to remove the 15mm screw. Turn the T10 Security Torx screwdriver counterclockwise to remove the 15mm screw.
    • Turn the T10 Security Torx screwdriver counterclockwise to remove the 15mm screw.

  5. Use the iFixit Opening Tool to pry the side of the vacuum open.
    • Use the iFixit Opening Tool to pry the side of the vacuum open.

  6. Remove the side component with your hands.
    • Remove the side component with your hands.

Conclusione

To reassemble your device, follow these instructions in reverse order.

caoimhe

Membro da: 08/10/2018

607 Reputazione

4 Guide realizzate

Team

Cal Poly, Team S17-G5, White Fall 2018 Membro di Cal Poly, Team S17-G5, White Fall 2018

CPSU-WHITE-F18S17G5

4 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 13

Tutti i Tempi: 150