Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Squeeze Dust Cup release buttons on either side of the component.
-
Pull up to release Dust Cup.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the pre-motor filter with your hands.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 15 mm screws by twisting counterclockwise with the T10 Torx screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 12 mm screws by twisting counterclockwise with the T15 Torx screwdriver.
-
To fully remove the power cord, cut the wires using a wire cutter.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.