Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement

Introduzione

This guide will show you how to take apart the fan to remove the Printed Circuit Board.

Cosa ti serve

  1. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement, Installing the PCB (Printing Circuit Board): passo 1, immagine 1 di 1

    • Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.

    • Do this by unscrewing from left-to-right then pull the screws out of the back of the fan

    Traduci

  2. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: passo 2, immagine 1 di 1

    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely because it holds the wires.

    Traduci

  4. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: passo 3, immagine 1 di 1

    • Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.

    • Make sure the fan is unplugged while removing the circuit board as you may get shocked.

    Traduci

  5. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: passo 4, immagine 1 di 1

    • Remove the top cover containing the circuit board and the wires by pulling it away from the body of the fan.

    Traduci

  6. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: passo 5, immagine 1 di 2 Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: passo 5, immagine 2 di 2

    • Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you may damage circuit elements.

    • Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 12 altri collaboratori

Mateo Begue

Membro da: 09/26/12

102 Reputazione

2 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

Cal Poly, Team 15-46, Forte Fall 2012 Membro di Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

5 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 12

Tutti i Tempi: 1,481