Salta al contenuto principale

Sega Genesis Reset Button Repair

Cosa ti serve

  1. Sega Genesis Reset Button Repair, Outer Case: passo 1, immagine 1 di 1
    • Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

  2. Sega Genesis Reset Button Repair: passo 2, immagine 1 di 1
    • Flip the Sega Genesis upright.

  3. Sega Genesis Reset Button Repair: passo 3, immagine 1 di 1
    • Gently lift the top casing.

    • Note: the case will be connected to the main board by LED wires.

  4. Sega Genesis Reset Button Repair: passo 4, immagine 1 di 1
    • Bend out the LED leads into vertical positions.

  5. Sega Genesis Reset Button Repair: passo 5, immagine 1 di 1
    • Slide the LED wire apparatus off the lead pins.

    • Note: observe which color wire corresponds with which length of pin.

  6. Sega Genesis Reset Button Repair: passo 6, immagine 1 di 1
    • Separate the main board from the outer case.

  7. Sega Genesis Reset Button Repair, Sega Genesis Reset Button Repair: passo 7, immagine 1 di 1
    • Using Philips screwdriver, remove 11 screws securing silver casing.

  8. Sega Genesis Reset Button Repair: passo 8, immagine 1 di 1
    • Remove silver case.

  9. Sega Genesis Reset Button Repair: passo 9, immagine 1 di 1
    • Locate reset button on motherboard

  10. Sega Genesis Reset Button Repair: passo 10, immagine 1 di 1
    • Place three pieces of 1cm x 1cm masking tape over reset button.

Conclusione

To reassemble your device, follow these instructions in reverse order. And the most important, be happy!

Un'altra persona ha completato questa guida.

calvin

Membro da: 10/05/10

234 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 3-29, Regan Fall 2010 Membro di Cal Poly, Team 3-29, Regan Fall 2010

CPSU-REGAN-F10S3G29

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 20

Ultimi 30 Giorni: 56

Tutti i Tempi: 16,683