Salta al contenuto principale

Introduzione

This repair guide will take you through all the steps for removing the outer case of the Sega Genesis.

Parti

Nessuna parte specificata.

  1. Remove the six screws from the underside of the console with a Phillips #1 screwdriver.
    • Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

  2. Flip the Sega Genesis upright.
    • Flip the Sega Genesis upright.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Gently lift the top casing.
    • Gently lift the top casing.

    • Note: the case will be connected to the main board by LED wires.

  5. Bend out the LED leads into vertical positions.
    • Bend out the LED leads into vertical positions.

  6. Slide the LED wire apparatus off the lead pins.
    • Slide the LED wire apparatus off the lead pins.

    • Note: observe which color wire corresponds with which length of pin.

  7. Separate the main board from the outer case.
    • Separate the main board from the outer case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 11 persone hanno completato questa guida.

Erik Bjornstrom

Membro da: 04/10/2010

662 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 3-29, Regan Fall 2010 Membro di Cal Poly, Team 3-29, Regan Fall 2010

CPSU-REGAN-F10S3G29

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 96

Tutti i Tempi: 15,218