Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Sega Genesis Motherboard Replacement

Cosa ti serve

  1. Sega Genesis Motherboard Replacement, Outer Case: passo 1, immagine 1 di 1
    • Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

  2. Sega Genesis Motherboard Replacement: passo 2, immagine 1 di 1
    • Flip the Sega Genesis upright.

  3. Sega Genesis Motherboard Replacement: passo 3, immagine 1 di 1
    • Gently lift the top casing.

    • Note: the case will be connected to the main board by LED wires.

  4. Sega Genesis Motherboard Replacement: passo 4, immagine 1 di 1
    • Bend out the LED leads into vertical positions.

  5. Sega Genesis Motherboard Replacement: passo 5, immagine 1 di 1
    • Slide the LED wire apparatus off the lead pins.

    • Note: observe which color wire corresponds with which length of pin.

  6. Sega Genesis Motherboard Replacement: passo 6, immagine 1 di 1
    • Separate the main board from the outer case.

  7. Sega Genesis Motherboard Replacement, Motherboard: passo 7, immagine 1 di 1
    • Remove single black screw from the outside of the bottom cover, using a Philips screwdriver.

  8. Sega Genesis Motherboard Replacement: passo 8, immagine 1 di 1
    • Using a Philips screwdriver, remove 11 screws securing silver casing.

  9. Sega Genesis Motherboard Replacement: passo 9, immagine 1 di 1
    • Remove silver case.

  10. Sega Genesis Motherboard Replacement: passo 10, immagine 1 di 1
    • Remove single golden screw on motherboard using Philips screwdriver.

    • Note: Push headphone jack to the side.

  11. Sega Genesis Motherboard Replacement: passo 11, immagine 1 di 1
    • Remove two black screws on the left and right sides of the cartridge slot.

  12. Sega Genesis Motherboard Replacement: passo 12, immagine 1 di 1
    • Remove motherboard.

  13. Sega Genesis Motherboard Replacement: passo 13, immagine 1 di 1
    • Re-install new motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 13 persone hanno completato questa guida.

Team

Cal Poly, Team 3-29, Regan Fall 2010 Membro di Cal Poly, Team 3-29, Regan Fall 2010

CPSU-REGAN-F10S3G29

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 47

Ultimi 30 Giorni: 207

Tutti i Tempi: 32,972