Salta al contenuto principale

Sega Game Gear Case Replacement

Cosa ti serve

  1. Sega Game Gear Case Replacement, Battery: passo 1, immagine 1 di 1
    • Place your device upside down and locate the two battery compartments.

  2. Sega Game Gear Case Replacement: passo 2, immagine 1 di 1
    • Press on the tabs at the bottom of the battery covers then lift up to remove.

    • Remove batteries if they are present.

  3. Sega Game Gear Case Replacement, Case: passo 3, immagine 1 di 1
    • Remove the following screws:

    • Six Phillips screws

    • One 4.5 mm Gamebit screw

  4. Sega Game Gear Case Replacement: passo 4, immagine 1 di 1
    • Use tweezers to take all other screws out.

  5. Sega Game Gear Case Replacement: passo 5, immagine 1 di 2 Sega Game Gear Case Replacement: passo 5, immagine 2 di 2
    • Gently open the case by unfolding it over the top of the Sega Game Gear.

    • Do not pull the back of the case away, as cables are connected between both sides.

  6. Sega Game Gear Case Replacement: passo 6, immagine 1 di 3 Sega Game Gear Case Replacement: passo 6, immagine 2 di 3 Sega Game Gear Case Replacement: passo 6, immagine 3 di 3
    • Carefully unplug the 2 white-tipped connectors on the top cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

Team

Cal Poly, Team 28-33, Regan Spring 2010 Membro di Cal Poly, Team 28-33, Regan Spring 2010

CPSU-REGAN-S10S28G33

5 Membri

13 Guide realizzate

Un commento

Is this guide made to help replacing the Game Gear shell? Almost doesn't seem like a thorough guide, I'm still seeing screws on the motherboard in the last photo, I assume those get taken out too?

Alex Tomalty - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 100

Tutti i Tempi: 19,542