Introduzione

The purpose of this replacement guide is to remove the Sega plastic casing to expose the internal content for further repair.

Parti

Nessuna parte richiesta.

  1. Using a Phillips head screwdriver remove  six screws from the bottom of the console. The six screws are marked.
    • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

  2. Remove the two screws that attach the Genesis' connector to the rest of the console.
    • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

  3. Slide the lock tab to the left to separate the halves of the console.
    • Slide the lock tab to the left to separate the halves of the console.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Lift from the left side to remove the top of the case.
    • Lift from the left side to remove the top of the case.

  6. Using the spudger, pry the cover off of the Genesis attachment.
    • Using the spudger, pry the cover off of the Genesis attachment.

  7. Lift the top of the case to remove the cover.
    • Lift the top of the case to remove the cover.

  8. Remove the faceplate by pulling it up, then out.
    • Remove the faceplate by pulling it up, then out.

Conclusione

To reassemble the device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ryan Kotzebue

Membro da: 07/10/2010

259 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 5-14, Maness Fall 2010 Membro di Cal Poly, Team 5-14, Maness Fall 2010

CPSU-MANESS-F10S5G14

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 19

Tutti i Tempi: 4,227