Introduzione

If the display on the Sony Dream Machine is not showing up properly or has any similar issues, the display monitor may need to be adjusted. Please see the Sony Dream Machine ICF-C717PJ Troubleshooting page: Sony Dream Machine ICF-C717PJ to eliminate other possible issues before tampering with the screen/display.

Parti

Nessuna parte richiesta.

Using the Phillips #0 screwdriver, unscrew all screws connecting back panel to the device.
  • Using the Phillips #0 screwdriver, unscrew all screws connecting back panel to the device.

Aggiungi Commento

Pry open back cover of the clock with a thin, flat tool.
  • Pry open back cover of the clock with a thin, flat tool.

Aggiungi Commento

  • Unscrew the screws connecting the motor board to the device.

  • Gently pull motor board away from the device to gain access to the screen.

Aggiungi Commento

  • Flip the device over so the front is facing you and push the screen inwards, towards the inside of the device.

  • After removing screen, insert the new one by pressing it firmly into place. When correctly locked in place, the screen should not easily move in either direction.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gurleen Powar

Membro da: 11/08/2018

373 Reputazione

3 Guide realizzate

Team

UW Tacoma, Team S1-G3, Liner Summer 2018 Membro di UW Tacoma, Team S1-G3, Liner Summer 2018

UWT-LINER-SU18S1G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 13

Tutti i Tempi: 54