Salta al contenuto principale

Sanyo VPC-T850 Shutter Button Replacement

Cosa ti serve

  1. Sanyo VPC-T850 Shutter Button Replacement, Battery: passo 1, immagine 1 di 1
    • Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.

  2. Sanyo VPC-T850 Shutter Button Replacement: passo 2, immagine 1 di 1
    • Locate the hatch found on the bottom of the camera.

    • Open the hatch by gripping the small notch and sliding it outwards.

  3. Sanyo VPC-T850 Shutter Button Replacement: passo 3, immagine 1 di 1
    • Push the small, plastic arm out of the way to free the battery.

    • The battery is spring loaded and will pop out slightly when the arm is moved.

  4. Sanyo VPC-T850 Shutter Button Replacement: passo 4, immagine 1 di 1
    • Pull the battery out of the camera and close the hatch.

    • To reinsert, there is a triangle on the battery indicating which direction to slide it in.

  5. Sanyo VPC-T850 Shutter Button Replacement, Outer Casing: passo 5, immagine 1 di 3 Sanyo VPC-T850 Shutter Button Replacement, Outer Casing: passo 5, immagine 2 di 3 Sanyo VPC-T850 Shutter Button Replacement, Outer Casing: passo 5, immagine 3 di 3
    • Using your Phillips #000 Screwdriver, remove the eight screws located around the sides and bottom of the camera.

    • Be sure to keep track of the side each screw comes from, as they come in different lengths.

  6. Sanyo VPC-T850 Shutter Button Replacement: passo 6, immagine 1 di 2 Sanyo VPC-T850 Shutter Button Replacement: passo 6, immagine 2 di 2
    • Orient the camera so the display is facing up.

    • Gently pull off the rear panel surrounding the display.

    • There are still three green wires connecting the panel to the rest of the camera.

    • Use your prying tool if you have difficulties removing the panel by hand.

  7. Sanyo VPC-T850 Shutter Button Replacement: passo 7, immagine 1 di 1
    • Remove the eight black screws connecting the keypad circuit board to the rear panel.

  8. Sanyo VPC-T850 Shutter Button Replacement: passo 8, immagine 1 di 2 Sanyo VPC-T850 Shutter Button Replacement: passo 8, immagine 2 di 2
    • With a plastic opening tool, gently remove the chrome framing on the left and right sides of the camera.

  9. Sanyo VPC-T850 Shutter Button Replacement: passo 9, immagine 1 di 1
    • Flip the camera over so the lens is facing up.

    • Gently lift up the front panel to remove it from the rest of the camera.

    • Use your plastic opening tool if you have difficulties removing the panel by hand.

  10. Sanyo VPC-T850 Shutter Button Replacement, Shutter Button: passo 10, immagine 1 di 1
    • Find the chrome framing located on the top of the camera.

    • The physical shutter button apparatus is directly attached to this frame.

  11. Sanyo VPC-T850 Shutter Button Replacement: passo 11, immagine 1 di 2 Sanyo VPC-T850 Shutter Button Replacement: passo 11, immagine 2 di 2
    • Remove the three black screws connecting the chrome frame to the camera.

    • Three screws are located toward the front, with the remaining one above the display.

  12. Sanyo VPC-T850 Shutter Button Replacement: passo 12, immagine 1 di 1
    • Gently remove the loosened chrome frame and connected shutter button from the camera.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015 Membro di UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G5

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 164