Salta al contenuto principale

Sanyo Katana Screen Protector Replacement

Cosa ti serve

  1. Sanyo Katana Screen Protector Replacement, Screen Protector: passo 1, immagine 1 di 2 Sanyo Katana Screen Protector Replacement, Screen Protector: passo 1, immagine 2 di 2
    • With the flat end of a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.

  2. Sanyo Katana Screen Protector Replacement: passo 2, immagine 1 di 2 Sanyo Katana Screen Protector Replacement: passo 2, immagine 2 di 2
    • Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.

  3. Sanyo Katana Screen Protector Replacement: passo 3, immagine 1 di 2 Sanyo Katana Screen Protector Replacement: passo 3, immagine 2 di 2
    • Carefully pry the screen protector off the phone using the flat end of the spudger.

    • This will require a bit of force as the back of the screen protector is lined with an adhesive material.

    • Once free from the adhesive, pull the screen protector away from the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

StephenYH

Membro da: 03/11/13

20 Reputazione

3 Guide realizzate

Team

Clemson, Team 12-1, Benson Spring 2013 Membro di Clemson, Team 12-1, Benson Spring 2013

CLEM-BENSON-S13S12G1

4 Membri

20 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 305