Introduzione

To replace a faulty microphone follow the steps in this guide. This may be your only option if you find yourself unable to make voice recordings anymore with your device.

  1. Remove the battery compartment cover.
    • Remove the battery compartment cover.

    • Remove the battery.

    Aggiungi Commento

  2. Locate and remove the screw next to the battery compartment lid.
    • Locate and remove the screw next to the battery compartment lid.

    Aggiungi Commento

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    Aggiungi Commento

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    Aggiungi Commento

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • You now have access to all components found on the inside of the device!

    Aggiungi Commento

    • Locate microphone on motherboard.

    Aggiungi Commento

    • Find where microphone is connected to motherboard via solder.

    Aggiungi Commento

    • Use the soldering iron to liquefy the solder connecting the microphone to the motherboard.

    Aggiungi Commento

    • The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.

    • When not in use, be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

    Aggiungi Commento

    • Remove the faulty microphone as you heat and melt the soldering points.

    Aggiungi Commento

    • Replace the faulty microphone with a new one in working order.

    Aggiungi Commento

    • With the new microphone in place, use the soldering iron and solder to create a stable connection between the motherboard and microphone.

    • Give the new solder time to cool and harden.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

James Thorne

Membro da: 05/11/2013

625 Reputazione

6 Guide realizzate

Team

UMass Dartmouth, Team 1-8, Shastany Fall 2013 Membro di UMass Dartmouth, Team 1-8, Shastany Fall 2013

UMASSD-SHASTANY-F13S1G8

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 317