Sandal Brooch Replacement

Introduzione

An awesome sandal lost its sparkly ornament. Its mate still sparkles and looks super-cute—save the sandals! You can find a replacement ornament or brooch at a hobby or craft shop, and using basic sewing skills, you can attach a replacement. Be careful if you're a novice—needles are sharp!

Cosa ti serve

Passo 1 Brooch

Sandal Brooch Replacement, Brooch: passo 1, immagine 1 di 3

Sandal Brooch Replacement, Brooch: passo 1, immagine 2 di 3

Sandal Brooch Replacement, Brooch: passo 1, immagine 3 di 3

Unwind about 10" of thread. Cut and thread through the needle. Tie a double knot at the end of the thread.

Modifica

Passo 2

The threads and empty holes show exactly where to attach the shoe ornament.
Cut off the old threads.

Modifica

Passo 3

Start the threaded needle on the upper side of the sandal.
The ornament will hide the knot.
If pushing the needle through the sandal strap is difficult, you might try turning the sandal at an angle and using your flat surface as a pressing point.

Modifica

Passo 4

Pull the thread through the ornament's opening.
Be careful—needles are sharp!

Modifica

Passo 5

Sandal Brooch Replacement: passo 5, immagine 3 di 3

Pull the thread down and through the sandal straps.
Repeat the process, catching the ornament in a variety of places to anchor several sides.

Modifica

Passo 6

Pull the thread so that the ornament is tight against the sandal.
Remember to beware of that sharp needle!

Modifica

Passo 7

Run the needle back through the sandal strap, then tie a knot at the base of the thread.
Double the knot before using your scissors to cut the thread.
Cut the thread just above the knot.
Be careful—scissors are sharp.